Dell XLH1 Using the Wireless Controller

Using the Wireless Controller

When you press the buttons on the wireless controller, point it at one of the camcorder’s remote sensors.

The camcorder has three remote sensors: two at the front and one at the back.

Inserting the Batteries

The wireless controller operates with two AA (R6) batteries.

1.Open the battery cover.

2.Insert the batteries following the + and –

markings.

3. Close the battery cover.

The camcorder and wireless controller are equipped with 2 remote sensor modes ( 106). If the wireless controller does not work, check if the camcorder and wireless controller are set to the same mode.

When the camcorder cannot be operated with the wireless controller, or when it can only be operated at very close range, replace the batteries. Make sure to replace both batteries at the same time.

The wireless controller may not work properly when the remote sensor is located under strong light sources or direct sunlight.

26