Dell XLH1 List of Messages

List of Messages

Message			Explanation
SET THE TIME ZONE, DATE	You have not set the time zone, date and time. This message appears each			39
AND TIME	time you turn the power on until you set the time zone, date and time.
CHANGE THE BATTERY	Battery pack is exhausted. Replace or charge the battery pack.			14
PACK
THE TAPE IS SET FOR	Cassette is protected. Replace the cassette or change the position of the			138
ERASURE PREVENTION	protect switch.
REMOVE THE CASSETTE	Camcorder stopped operating to protect the tape. Unload and reload the			27
	cassette.
CHECK THE HDV/DV INPUT	DV cable is not connected, or the connected digital device is turned off.			107
CONDENSATION HAS BEEN	Condensation has been detected in the camcorder.			136
DETECTED
TAPE END	Tape reached the end. Rewind the tape or replace the cassette.				–
HEADS DIRTY, USE	Video heads are dirty. Clean the video heads.			135
CLEANING CASSETTE
ENTERING “POWER	Appears for 1 second when you press the STANDBY button.			41
STANDBY”
CHECK THE LENS	Lens is not correctly mounted. Turn the lens until it clicks. If the message does			22
	not disappear, unmount and remount the lens.
NO CARD	Memory card not is inserted into the camcorder.			28
NO IMAGES	No images are recorded on the memory card.				–
CARD ERROR	A memory card error occurred. The camcorder cannot record or play back the
	image.
	The error may be temporary. If the message disappears after 4 seconds an				–
	“	” flashes red, turn the camcorder off, remove the card and reinsert the
	card. If “		” changes to green, you can continue recording/playback.
CARD FULL	No remaining capacity on the memory card. Replace with another card or				–
	erase images.
NAMING ERROR	The folder and file numbers have reached their maximum value.				–
UNIDENTIFIABLE IMAGE	Image is not recorded with JPEG compression, or with a compression not				–
	compatible with the camcorder, or the image file is corrupted.
THE CARD IS SET FOR	SD memory card is set for erasure prevention. Replace the card or change the			28
ERASURE PREVENTION	position of the protect switch.
INCORRECT TAPE	You attempted to play back a tape recorded in a standard different than the one
STANDARD PLAYBACK IS	to which is the camcorder is set.				–
RESTRICTED
THE MEMORY CARD COVER	Close the memory card cover.			28
IS OPEN
HD INCOMPATIBLE LENS	You mounted a lens that does not support HDV recording.			22
THIS LENS HAS NO STILL	You mounted a lens that does not support still images recording.			22
SHOOTING CAPABILITY
INCOMPATIBLE INPUT	You attempted to input a video signal incompatible with the camcorder (for			107
SIGNAL	example 720p).
PLAYBACK STD LOCKED	When the playback standard is already set in the camcorder, you attempted to			94
PLAYBACK IS RESTRICTED	play back a tape in a video standard different from that set.
PLAYBACK STD LOCKED	When the playback standard is already set in the camcorder, you attempted to			107
INCOMPATIBLE VIDEO INPUT	input a video signal in a standard different from that set.
COPYRIGHT PROTECTED	You attempted to play back a copyright protected tape.			108
PLAYBACK IS RESTRICTED
COPYRIGHT PROTECTED	You attempted to dub a copyright protected tape. May also appear when an
DUBBING RESTRICTED	anomalous signal is received during analog line-in recording, or during analog-			108
	digital conversion of a copyright protected tape.

E

Information Additional

133