Selecting the Drive Mode
|
|
|
| Continuous Shooting | Captures a quick series of still images while you hold the PHOTO button |
|
|
|
| ||
|
|
|
|
| pressed down. For the number of frames per second, refer to the table |
|
|
|
| ||
|
|
|
| ||
|
|
|
|
| below. |
|
|
|
| AEB | The camcorder records a still image in three different exposures (dark, |
|
|
|
| ||
|
|
|
| (Auto Exposure Bracketing) | normal, light in 1/2 EV steps). |
|
|
|
| Single | Records a single still image when you press the PHOTO button. |
|
|
|
| ||
|
|
|
|
|
|
DRIVE MODE button
PHOTO button
Changing the Drive Mode
1.Set the POWER dial to a recording program other than 
and move the TAPE/CARD switch to 
.
2.Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button pressed down.
Maximum number of continuous shots at one time:
Still Image Size | Frames per Second | Maximum Number of | ||
Normal speed | High speed | Continuous Shots | ||
| ||||
LW 1920 x 1080 | 3 frames | 5 frames | 30 images | |
SW 848 x 480 | 3 frames | 5 frames | 60 images | |
L 1440 x 1080 | 3 frames | 5 frames | 30 images | |
S 640 x 480 | 3 frames | 5 frames | 60 images | |
These figures are approximate and vary with the recording conditions and subjects. Sufficient space on the memory card is required. Continuous shooting stops when card is full.
116