Recording Color Bars/Audio Reference Signal

Color Bars

E

You can generate and record SMPTE (Society of Motion Picture and Television Engineers) color bars.

BARS/FADE SELECT button

BARS/FADE ON/OFF button

1.Press the BARS/FADE SELECT button to display “COLOR BARS”.

•Repeatedly pressing the button will cycle through the options in the following order: COLOR BARS, WHITE FADE, BLACK FADE, no display.

•“COLOR BARS” starts flashing.

2.Press the BARS/FADE ON/OFF button.

“COLOR BARS” stops flashing, and the color bars appear. Press the button again to deactivate the color bars.

Audio Reference Signal

You can record a 1 kHz audio reference signal (-12 dB or -20 dB) along with the color bars.

MENU

AUDIO SETUP

 

1 kHz TONE••••OFF

 

(

29)

 

 

 

 

 

 

 

 

Open the menu and select [AUDIO SETUP]. Select [1kHz TONE], select the audio signal and close the menu.

•The selected audio reference signal sounds.

•If you select [OFF] the current audio input (microphone, line in, etc.) will be recorded as the audio signal.

Recording

89