NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.

1Follow the procedures in "Before You Begin" on page 115.

2Remove the hinge cover (see "Hinge Cover" on page 118).

1

2

3

 

 

 

 

 

4

 

 

 

5

 

 

1

connector wire

2

plastic scribe

3

plastic securing tab

4

metal securing tab

5

plastic securing tab

 

 

NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.

3Carefully remove the card cable from its routing guide.

4While grasping the card cable with one hand, use a plastic scribe to gently pry the card out from underneath the metal tab with the other hand.

5Lift the card from the compartment, ensuring that you do not pull on the card cable with excessive force.

6Disconnect the card from the cable and remove the card from the computer.

Adding and Replacing Parts

121

Page 121
Image 121
Dell YT465 manual 121