2

1

1 metal securing tabs (2)

2

Mobile Broadband card

bUse your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly.

cSlide and lift the Mobile Broadband card out of its connector.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

NOTICE: The Mobile Broadband card may have one or two connectors, depending on the type of card you ordered.

NOTE: Do not insert a WLAN card into the Mobile Broadband card slot.

5To install a Mobile Broadband card:

a Move any antenna cables out of the way to make space for the Mobile Broadband card.

b Align the card with the connector at a 45-degree angle, and press the card into the connector until you feel a click.

NOTICE: To avoid damaging the Mobile Broadband card, never place cables on top of or under the card and ensure that you route the cables properly.

NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband card.

cConnect the white antenna cable to the connector on the card marked with a white triangle; connect the black antenna cable to the connector on the card marked with a black triangle.

Adding and Replacing Parts

131

Page 131
Image 131
Dell YT465 manual 131