Coin-Cell Battery

CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1Follow the procedures in "Before You Begin" on page 115.

2Remove the hinge cover (see "Hinge Cover" on page 118).

3Remove the keyboard (see "Keyboard" on page 119).

1

2

3

1 coin-cell battery

2 coin-cell battery

3 plastic arm

connector

 

 

4Remove the coin-cell battery connector from the connector on the system board.

5Being careful not to break the plastic, slightly raise the corner of the mylar above the battery.

6While holding the mylar, grasp the battery and pull out of the battery compartment.

Memory

You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 141 for information on the memory supported by your computer. Install only memory modules that are intended for your computer.

122

Adding and Replacing Parts

Page 122
Image 122
Dell YT465 manual Coin-Cell Battery, Memory, 122