DeLonghi DMFPSII manual Automatic Oven Cooking

AUTOMATIC OVEN COOKING

To cook food automatically in the oven, it is necessary to: 1.Set the length of the cooking time

2.Set the end of the cooking time

3.Set the temperature and the oven cooking program.

These operations are performed as follows:

1.Set the length of the cooking time by pushing the button and the button

to advance, or to go back if you have passed the desired time (fig. 21).

The AUTO and the symbol will be on.

2.Set the end of the cooking time by pressing the button (the cooking time already

added to the clock time will appear), and the button (fig. 22); if you pass the

desired time you may get back by pushing the button.

After this setting, the symbol will go off. If after this setting, the AUTO flashes on the panel and a buzzer sounds, it means there was an error in the programming. If this is the case, modify the end of cooking time or the cooking time itself by repeating the procedure above.

3.Set the temperature and the cooking program by using the switch and thermostat knobs of the oven (see specific chapters).

The oven is now set to turn on and off at the programmed times.

During cooking, the symbol remains on. By pushing the button you can see the time that remains until the end of cooking.

The cooking program may be cancelled in any time by pushing .

At the end of the cooking time the oven will turn off automatically, the symbol will turn off, AUTO will flash and a buzzer will sound, which can be turned off by pushing any of the buttons.

Turn the temperature and thermostat knobs to zero and set the programmer to “man-

ual” by pressing the button.

Attention: A power failure resets the clock back to zero and cancels the set programs. After a power failure, three zeros will flash on the panel.

Figure 21

P

A

U

T

O

22