INSTALLATION
CAUTION:
■This appliance must be installed in accordance with these installation instructions.
■This appliance shall only be serviced by authorized personnel.
■This appliance is to be installed only by an authorised person.
■Incorrect installation, for which the manufacturer accepts no responsibil- ity, may cause personal injury of damage.
■Always disconnect the oven from mains power supply before carrying out any maintenance operations or repairs.
ELECTRICAL REQUIREMENTS
■The oven is supplied without a power supply plug and therefore if you are not connecting directly to the mains, a standardized plug suitable for the load must be fitted.
■Connection to the mains must be carried out by qualified personnel in accordance with current regulations.
■The appliance must be connected to the mains checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.
■The plug must be connected to an earthed socket in compliance with safety standards.
■The appliance must be connected directly to the mains placing a two pole switch with minimum opening between the contacts of 3 mm between the appliance and the mains.
■The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point.
■Once the appliance has been installed, the switch or socket must always be accessible.
■If the supply cord is damaged it must be replaced by the manufacturer or its Service Agent or a similarly qualified person in order to avoid a hazard.
N.B. • The connection of the appliance to earth is mandatory.
•For connection to the mains, do not use adapters, reducers or branching devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system call a qualified |
|
electrician. He should also check that the socket cable section is suitable for the power |
|
drawn by the appliance. | 5 |
|
