Advice for use and maintenance of catalytic panels (models with catalytic panels)
The catalytic panels are covered with special microporous enamel which absorbs and does away with oil and fat splashes during normal baking over 200°C. If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling” on max temperature for about 30 minutes. These panels do not require to be cleaned, however it is advised to periodically remove them from the oven (at least the side panels) and to wash them with tepid soapy water and then wipe off with a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH PRODUCTS CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the catalytic microporous enamel degrades, they can be turned to the other side.
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
■Let the oven cavity and the heating elements to cool down;
■Switch off the electrical supply;
■Unscrew the protective cover (fig. 30);
■Unscrew and replace the bulb with a new one suitable for high tempera- tures (300°C) having the following specifications:
■Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee
Figure 30
2 | 1 |
|
33
