REPAIRS
REPLACING THE POWER SUPPLY CABLE
■Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. 2).
■Open the cable gland by unscrewing screw “F” (fig. 3), unscrew the terminal screws and remove the cable.
■The new supply cable, of suitable type and section, is connected to the terminal board following the diagram fig. 1.
FEEDER CABLE SECTION TYPE HO5RR-F
230 V | 3 x 1,5 mm2 |
Figure 1
230 V
6
L1
Figure 2
A
N(L2 )
E
Figure 3
F