FITTING REQUIREMENTS
WARNING: Taking care NOT to lift the oven by the door handle.
The oven must be
It is to be fit up in a module having the clearance as shown in the pictures. On the lower side, the oven must lay on supports standing the oven weight.
The ovens are secured by four screws that pass through the surround. They must locate firmly and squarely in the edges of the cabinet or add panels to achieve a secure location.
Figure 6
594
594
560
536 | m |
| in |
540
20
591 |
|
550 | min |
|
The walls surround- ing the oven must be made of heat- resistant material. Both the veneered plastic and the adhe- sive used must be resistant to tempera- tures of 120°C in order to prevent unsticking and defor- mation.
Figure 7
FITTING THE OVEN INTO A BASE
The space available should be of the dimensions shown in the figure 6. Arrangements should be made for an adequate supply of the air to the oven to avoid overheating (fig. 7).
600 |
9
