Professional Jointer | Delta 37-195, 37-275X instruction

6" Professional Jointer

(Model 37-195) (Model 37-275X)

INSTRUCTION MANUAL

PART NO. 909995 - 01-22-03

Copyright © 2003 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Delta 37-195, 37-275X instruction manual Professional Jointer

Contents

Professional Jointer General Safety Rules Safety Guidelines / Definitions Refer to them often Use them to instruct others Additional Safety Rules for Jointers Power Connections Extension Cords Unpacking and Cleaning Jointer Parts Stand and Electricals Assembly Assembling Motor Pulley Assembling Jointer to Stand Assembling Belt and Aligning Pulleys Adjusting Belt Tension Assembling Fence Assembling Fence Carriage Assembly Assembling Cutterhead Guard Assembling Switch and Mounting Bracket Assembling Dust Chute Operating Controls and AdjustmentsStarting and Stopping Jointer Infeed Table Adjustments Locking Switch OFF Position Knife Adjustments Outfeed Table AdjustmentsInfeed Table Positive Stops Page Fence Operation Adjusting Table Gibs Lock nut D. Turn adjustment screw a until Adjusting Fence Positive Stop REMOVING, REPLACING, and Resetting Knives Operation Placement of Hands During FeedingJointing AN Edge Beveling SurfacingTaper Cuts Cutting a Rabbet Surfacing Warped Pieces Maintenance and RepairsSurfacing Short Or Thin Work Direction of Grain Constructing a Push Stick Pushstick Accessories Canadian PORTER-CABLE Delta Service Centers