Delta 37-195, 37-275X instruction manual Assembly, Stand and Electricals

	20
16		27
	21
				28
	22
							33
			29
	23
							34
					30
	24
							35
						31
	25
		32
17	26

19

18

		Fig. 5
16.	Stand with Pre-Wired Switch	26.	#10-16x1/2" Sheet Metal Screw (4)
17.	Dust Chute	27.	M10 Flat Washer (3)
18.	V-Belt	28.	11/32" Flat Washer (1)
19.	Pulley	29.	M8 Flat Washer (10)
20.	M10x1.5x20mm Hex Socket Head Screw (3)	30.	M10.2 Lockwasher (3)
21.	M8x1.25x55mm Hex Socket Head Screw (4)	31.	M8.1 Lockwasher (10)
22.	M8x1.25x30mm Hex Socket Head Screw (2)	32.	5/16" Lockwasher (1)
23.	M8x1.25x25mm Hex Socket Head Screw (2)	33.	M8x1.25 Hex Nut (2)
24.	M8x1.25x20mm Hex Socket Head Screw (2)	34.	5/16-18 Hex Nut (1)
25.	5/16-18x1" Hex Head Screw (1)	35.	Key

ASSEMBLY

FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.

STAND AND ELECTRICALS

Your Jointer stand (A) Fig. 6, is shipped with the motor and switch completely wired, and the motor mounted.

A

Fig. 6

7