Delta Electronics DOP-A Series Word Double Word, User can use y = a x read address value + b this

	Chapter 3 Element FunctionScrEdit Software User Manual
Property Description of Numeric Display Element
Leading Zero	The following figures show the difference if the user selects the Leading Zero option.
	(Please note that the integral digit is set to 4 digits.)
	(If YES is selected, the numeric value will show as this one.)
	(If NO is selected, the numeric value will show as this one.)
Detail

	Date Length	There are 16bits Word and 32bits Double Word two options.
	Data Format	There are following data format provided:
			Word		Double Word
		1.	BCD	1.	BCD
		2.	Signed BCD	2.	Signed BCD
		3.	Signed Decimal	3.	Signed Decimal
		4.	Unsigned Decimal	4.	Unsigned Decimal
		5.	Hex	5.	Hex
		6.	Binary	6.	Binary
				7.	Floating
	Integral Digits	Use this option to determine the digit number of integer and
		decimal fraction. The digit number (Fractional Digits) here is not a
		real decimal value. It is only the display format. The digit number
	Fractional Digits
		will be a real decimal only when the data format is selected as
		“Floating”.
	Gain (a)	The user can use y = (a) x (read address value) + (b) this
		equation to determine the display numeric value (y). For example,
		if Gain value (a) is 2 and Offset value (b) is 3, when the read
	Offset (b)	address value is 3, then the display numeric value will be equal to
		(2) x 3 + (3) = 9.
		If Gain and Offset value is a decimal, please set the data format
		as “Floating”.
	Round off	If this option is selected, after the operation of the equation
		above, all numeric values can be rounded off and display on the
		screen.
Revision Apr. 30th, 2007, 2007PDD23000002					3-33