Delta Electronics DOP-AE Series SETSYSTEMTIMEV1, V1 = Gethistory V2, „ Timetick, „ Getlasterror

Chapter 4 Macro FunctionScrEdit Software User Manual

Command	Equation	Descrption
SETSYSTEMTIME	SETSYSTEMTIME(V1)	Set system time
GETHISTORY	V1 = GETHISTORY (V2, V3,	Get history data
	V4, V5, V6)
„ TIMETICK

TIMETICK → Get the time from system startup to present and put into the specific address. An increment of 1 means 100ms is added.

„GETLASTERROR

GETLASTERROR → Get last error value. If there is no error occurred, the result of GETLASTERROR will be 0. Even if each Macro is executed simultaneously, the error message will not interfere with one another. For error code information, please refer to section 4.4.

„COMMENT

COMMENT → It lets Macro to be readable. Using this command will not affect macro function. The user only needs to put “#” in front of the equation and the macro will become readable. If the user wants to change the comment to be back to equation, just remove the “#” symbol.

„Delay

Delay → Delays the user setting time by system. As HMI system is a multiplexer system, the system delay problem may occur. Therefore, setting time will be increased due to “system busy” and the condition that the setting time move forward will not happen. But too many delay time settings may result in slow response of HMI. The unit of delay time is ms.

„GETSYSTEMTIME

Get system time

Equation: V1 = GETSYSTEMTIME

V1 is the starting address of continuous 7 Words within the internal memory address.

V1	Year
V1 + 1	Month
V1 + 2	Date
V1 + 3	Week
V1 + 4	Hour
V1 + 5	Minute
V1 + 6	Second

Example:

Now the system time is 2006/01/04 Wed 09:26:25. Using this command to get the current system time and store in $1~$7.

4-40 Revision Apr. 30th, 2007, 2007PDD23000002