Delta Electronics DOP-A Series, DOP-AE Series User can use y = a x read address value + b this

Chapter 3 Element FunctionScrEdit Software User Manual

Property Description of Numeric Entry Element

			Adjust the system keypad size
			Set the height of the title bar
			Set the font size
			Set the font
			Set the font color
			Set the background color
	Minimum	The user can set the minimum and maximum of input setting
	Maximum	value to determine the range of input setting value.
	Integral Digits	Use this option to determine the digit number of integer and
	Fractional	decimal fraction. The digit number is not a real digit number
		value. It is only the display format. The digit number will be a real
		decimal number only when the data format is selected as
		“Floating”.
	When Variable Minimum/Maximum Value option is selected, it indicates that the
	minimum value is determined by Read Address+1 and the maximum value is
	determined by Read Address+2.
	Gain (a)	The user can use y = (a) x (read address value) + (b) this
		equation to determine the display numeric value (y). For example,
	Offset (b)
		if Gain value (a) is 2 and Offset value (b) is 3, when the read
		address value is 3, then the display numeric value will be equal to
		(2) x 3 + (3) = 9.
		If Gain and Offset value is a decimal, please set the data format
		as “Floating”.
	Round off	If this option is selected, after the operation of the equation
		above, all numeric values can be rounded off and display on the
		screen.
	When the user have input the minimum and maximum value, after pressing OK
	button, HMI will examine the value by referring to the selected data length, data
	format, integral and fractional digits.
Input Mode	There are Touch Popup, Active Non-Popup and Touch Non-Popup three options. The
	default setting is Touch Popup. For the description of Active Non-Popup and Touch
	Non-Popup mode, please refer to section 3.15 Keypad Element.
User Security Level	Use this option to set the user priority for pressing this element. Only the priority that
	is equal to or higher than the current setting can use this element.

3-48 Revision Apr. 30th, 2007, 2007PDD23000002