Delta Temperature Controller User Manual
| Display | |
PV | SV | |
|
| + |
|
|
|
|
| + |
|
|
|
|
| + |
|
|
|
Explanations
Status of the temperature controller
Remaining time in the current step
Target temperature for the current execution
The pattern currently executed
Parameters relevant to PID PROG control
Press in the main screen of DTB to enter the “regulation mode”.
| Display | Explanations | |
PV |
| SV | Status of the temperature controller |
|
|
| The 0th PID parameter. There are 4 groups of PID parameters |
|
|
| built in DTB. When the parameter is set ass PID4, the system will |
|
|
| automatically adopt the PID value of the current temperature |
|
|
| closest to PID0 ~ 3. |
|
|
|
|
|
|
| The 0th SV |
|
|
|
|
|
|
| The 0th default value for proportional control |
|
|
|
|
|
|
| The 0th default value for integral control |
|
|
|
|
|
|
| The 0th default value for derivative control |
|
|
|
|
|
|
| The 0th default integral value |
|
|
|
|
|
|
| Heating/cooling control cycle |
|
|
|
|
|
|
|
|
|
|
| Temperature inaccuracy adjustment value |
|
|
|
|
|
|
|
|
Press | in the main screen of DTB to enter the “operation mode”. |
Display
PV | SV |
|
| / | / |
| / |
|
|
|
|
Explanations
Status of the temperature controller
Stop/run/program stop/program hold。
Program stop: Run the system again, and DTB will start from the initial step.
Program hold: Run the system again, and DTB will follow and start from the previous step.
- 20 - | © DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED |