Delta Electronics DTC1000R, DTA4896R1 user manual Display, Explanations

Delta Temperature Controller User Manual

	Display
PV		SV

＋

Switch off DTB and re-power it.

Explanations

Status of the temperature controller

Press “down” key continuously until the value reaches 1357 (please DO NOT modify this value; otherwise system confusion may occur).

Press the two keys together once to return to main screen.

Main screen

Return to default value. The default sensor is PT100, which will be displayed when DTB is not connected to a sensor or thermocouple.

The model adopted in this example is: DTB4896RR with firmware V1.50.

1.Make sure RS-485 hardware communication cable in DTB has been connected to the computer.

2.Make sure the communication parameters in DTB are consistent with those in the computer.

	Display
PV		SV

Press for more than 3 seconds to enter initial setting mode

Press continuously for 10 times

Explanations

Status of the temperature controller Example displayed value

Example displayed value: PT100 Sensor

ON/OFF of communication write-in

2007-09-17 - 8 - © DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED