Delta Electronics VFD-XXXM Parameter, Explanation, Settings, Factory, Customer, English-14

Parameter	Explanation	Settings	Factory	Customer
			Setting
Pr.73	Present Fault Record	00: No fault occurred	00
		01: Over-current (oc)
Pr.74	Second Most Recent	02: Over-voltage (ov)	00
	Fault Record	03: Overheat (oH)
		04: Overload (oL)
		05: Overload 1 (oL1)
		06: External Fault (EF)
		07: CPU failure 1 (CF1)
		08: CPU failure 3 (CF3)
		09: Hardware Protection Failure (HPF)
		10: Over-current during acceleration (oca)
		11: Over-current during deceleration
		(ocd)
	Third Most Recent	12: Over-current during steady state
Pr.75		operation (ocn)	00
	Fault Record
		13: Ground fault or fuse failure(GFF)
		14: Low Voltage (not record)
		15: 3 Phase Input Power Loss
		16: EPROM failure (CF2)
		17: External interrupt allowance(bb)
		18: Overload (oL2)
		19: Auto Adjustable accel/decel failure
		(CFA)
		20: CPU self detection failure (codE)
		00: All parameters can be set/read
		01: All parameters are read-only
Pr.76	Parameter Lock and	02-08: Reserved
		09: Resets all parameters to 50Hz factory	00
	Configuration
		defaults
		10: Resets all parameters to 60Hz factory
		defaults
	Time for Auto Reset the
Pr.77	Restart Times in	0.1 to 6000.0 sec	60.0
	Abnormality
		00: Disable PLC operation
		01: Execute one program cycle
		02: Continuously execute program cycles
Pr.78	PLC Operation Mode	03: Execute one program cycle step by	00
		step
		04: Continuously execute one program
		cycle step by step
Pr.79	PLC FWD/REV Motion	00 to 127	00
Pr.80	Identity Code of the AC	Read only	##
	Motor Drive
Pr.81	Time Duration of 1st	00 to 9999 sec	00
	Step Speed
Pr.82	Time Duration of 2nd	00 to 9999 sec	00
	Step Speed
Pr.83	Time Duration of 3rd	00 to 9999 sec	00
	Step Speed

English-14