Delta Electronics VFD-XXXM Description of Digital Keypad, Vfd-M, Selection mode, To modify data

Description of Digital Keypad

The digital keypad includes two parts: Display panel and keypad. The display panel provides the parameter display and shows the operation status of the AC drive and the keypad provides programming and control interface.

		DIGITAL KEYPAD
					LED Display
					Indicates motor and
Program/Function mode key					drive parameter.
Selects normal mode/					LED Indicates
program mode. Displays	RUN STOP		FWD REV		Lamp lights during RUN,
the AC drive status, such as					STOP, FWD & REV
output freq., selects the					operation.
parameters.	MODE			RUN	Run key
Enter Key					Starts AC drive operation.
Press ENTER after					STOP/RESET Key
				STOP
key in the elected	ENTER				Stops and resets the
				RESET
parameters or					parameter after a fault
change data.	50				occurs.
					UP and DOWN Key
Potentiometer			VFD-M		Sets the parameter number
For master Frequency					or changes the numerical
setting refer to Pr.00.					data such as the freq.
					reference.

0 100

FREQ SET

LC-M02E

How to Operate the Digital Keypad LC-M02E

Selection mode

START

MODE

MODE

MODE

MODE

MODE

GO START

NOTE: In the selection mode, press ENTER to set the parameters.

To set parameters

ENTER

ENTER	ENTER	parameter set
		successfully

or or

MODE move to previous

displayparameter set error

NOTE: In the parameter setting mode, you can press MODE to return to the selection mode.

To modify data

START

To set direction

(When operation source is digital keypad)

or or

English-5