Delta Electronics VFD-XXXM Parameter, Explanation, Settings, Factory, Customer, English-17

Parameter	Explanation	Settings	Factory	Customer
			Setting
Pr.119	Differential Time (D)	0.00 to 1.00 sec	0.00
Pr.120	Integration’s Upper	00 to 100 %	100 %
	Bound Frequency
Pr.121	One-Time Delay	0.0 to 2.5 sec	0.0
Pr.122	PID Frequency Output	00 to 110 %	100
	Command Limit
Pr.123	Feedback Signal	0.0: Disable	60.0
	Detection Time	0.1 to 3600 sec
Pr.124	Feedback Signal Fault	00: Warning and RAMP to stop	00
	Treatment	01: Warning and keep operating
Pr.125	Source of PID Set Point	0.00 to 400.0Hz	0.00
Pr.126	PID Offset Level	1.0 to 50.0 %	10.0
Pr.127	Detection Time of PID	0.1 to 300.0 sec	5.0
	Offset
Pr.128	Minimum Reference	0.0 to 10.0 V	0.0
	Value
Pr.129	Maximum Reference	0.0 to 10.0 V	10.0
	Value
Pr.130	Invert Reference Signal	00: Not inverted	00
	AVI (0-10V)	01: Inverted
Pr.131	Minimum Reference	0.0 to 20.0mA	4.0
	Value (4-20mA)
Pr.132	Maximum Reference	0.0 to 20.0mA	20.0
	Value (4-20mA)
Pr.133	Invert Reference Signal	00: Not inverted	00
	(4-20mA)	01: Inverted
Pr.134	Analog Input Delay	00 to 9999 (per 2ms)	50
	Filter for Set Point
	Analog Input Delay
Pr.135	Filter for Feedback	00 to 9999 (per 2ms)	5
	Signal
Pr.136	Sleep Period	0.0 to 6550.0 sec	0.0
Pr.137	Sleep Frequency	0.00 to 400.0 Hz	0.00
Pr.138	Wake Up Frequency	0.00 to 400.0 Hz	0.00
Pr.139	Treatment for Counter	00: Continue operation	00
	Attained	01: Stop Immediately and display E.F.
Pr.140	External Up/Down	00: Fixed Mode (keypad)
		01: By Accel or Decel Time	00
	Selection
		02: Reserved
Pr.141	Save Frequency Set	00: Not Save	01
	Point	01: Save

English-17