Delta Electronics VFD-XXXM Parameter, Explanation, Settings, Factory, Customer, English-18

Parameter	Explanation		Settings	Factory	Customer
				Setting
		00: Keypad Up/Down
	Second Source of	01: AVI (0-10V)
Pr.142		02: ACI (4-20mA)		00
	Frequency Command
		03: Communication
		04: Keypad potentiometer
		115V/230V	370-450 Vdc	380.0
Pr.143	Software Braking Level	460V	740-900 Vdc	760.0
		575V	925-1075 Vdc	950.0
Pr.144	Total operation time	Read Only
	(Day)
Pr.145	Total operation time	Read Only
	(Minutes)
Pr.146	Line start Lockout	00: Disable		00
		01: Enable
Pr.147	Decimal Number of	00: One decimal		00
	Accel / Decel Time	01: Two decimals
Pr.148	Number of Motor Poles	02 to 20		04
Pr.149	Gear Ratio for Simple	4 to 1000		200
	Index Function
Pr.150	Index Angle for Simple	00.0 to 360.0		180.0
	Index Function
Pr.151	Deceleration Time for	0.00 to 100.00 sec		0.00
	Simple Index Function
Pr.152	Skip Frequency Width	0.00 to 400.0Hz		0.00
Pr.153	Bias Frequency Width	0.00 to 400.0Hz		0.00
Pr.154	Reserved
	Compensation	0.0: Disable
Pr.155	Coefficient for Motor			0.0
		0.1 to 5.0 (recommended setting d2.0)
	Instability
Pr.156	Communication	0 to 200 (x500us)		0
	Response Delay Time
Pr.157	Communication Mode	0: Delta ASCII		1
	Selection	1: Modbus

English-18