Denon ADV-700 manual System setting changes, Setting the type of speakers, Parameters

ENGLISH

(4) System setting changes

•The quick system settings and factory default settings are changed at the system setting change menu.

•The settings are stored in the memory until they are next changed, even when the power is turned off.

[1] Setting the type of speakers

•The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.

1	At the SETUP MENU, select “SYSTEM SETUP” and press
	the ENTER button
2	At the SYSTEM SETUP MENU screen, use the	and
	cursor buttons to select the speaker system you are using.

“SPEAKER CONFIGURATION” and press the ENTER button.

S Y S T E M S E T U P M E N U B

S P E A K E R C O N F I G U R A T I O N

D E L A Y T I M E

C H A N N E L L E V E L

DVD AUTO POWER O F F

> SETUP MENU

SELECT : DEC I S ION: ENTER BUTTON

ENTER

Remote control unitRemote control unit

3	Set whether or not speakers are connected and, if so, their
	size parameters.
		CENTER SPEAKER
		FRONT SPEAKERS
		SUB WOOFER
	Remote control unit	SURROUND
		SPEAKEERS

4	Enter the setting.	ENTER
	• The Setup Menu reappears.

Remote control unit

NOTE:

•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (approximately 100 Hz and below) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

Parameters

Large…… Select this when using speakers that can fully reproduce

low sounds of below 100 Hz.

Small…… Select this when using speakers that do not provide

sufficient volume for playing low frequencies of 100 Hz and less. When this setting is made, frequencies below the frequency set at the subwoofer frequency setting are assigned to the subwoofer.

None…… Select this when no speakers are installed.

Yes/No…. Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

For the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results.

•The item to be set is displayed in yellow, and the values of the other items are displayed in green.

S P E A K E R C O N F I G U R A T I O N

B

F R O N T	S P . :
LARGE	SMALL
CENTER	S P . :
LARGE	SMALL	NONE
SURROUND S P . :
LARGE	SMALL	NONE
SUBWOOFER :		Y E S NO
SW F R E Q . : 1 2 0 H z
SW MODE : L F E		LFE + MAIN

SELECT :

FINISH: ENTER BUTTON

26