Operation, Playing the input source, Auto PCM DTS Analog

12 OPERATION

1,3 5

Playing the input source

1	Either turn the FUNCTION/SELECT dial on the main unit or
1	press the FUNCTION button on the remote control unit to
	select the input source you want to play.

	FUNCTION	FUNCTION
	/SELECT	FUNCTION
	/SELECT

Main unit

Remote control unit

•The function switches as shown below.

•The function only changes in the “Æ” direction when operated from the remote control unit.


	TUNER	DVD		TV/DBS

	CDR/TAPE		VCR		V.AUX


2	If “DVD”, “TV/DBS” or “V.AUX” is selected as the input
	source, press the INPUT MODE button on the remote

control unit to select the input mode.

INPUT MODE

Remote control unit

AUTO PCM DTS ANALOG

•“ANALOG” cannot be selected when “DVD” is selected as the input source.

Input mode selection function

This can be selected for the “DVD”, “TV/DBS” and “V.AUX” input sources.

Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory.

qAUTO (auto mode)

In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the ADV-700’s surround decoder is selected automatically upon playback.

ENGLISH

	POWER	CH		VCR
	OFF	4	5	6
	VCR POWER	CH		VOL
	CLEAR	7	8	9	TV
	TV POWER	CH	TV/VCR	SLEEP
	CALL	+10	0
	DISPLAY	RETURN	INPUT MODE SURROUND		3
2	MENU			FUNCTION	3
	MENU			FUNCTION	1

ENTER

MODE	5
	VOLUME
BAND
	MUTE
CH	SHIFT
	NTSC/PAL STATUS
TU	MEMO

The presence or absence of digital signals is detected, the signals input to the digital input are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format. If no digital signal (TV DRS and V.AUX) is being input, the analog input jacks are selected.

Use this mode to play Dolby Digital signals.

wPCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when PCM signals are being input.

Note that noise may be generated when using this mode to play signals other than PCM signals.

eDTS (exclusive DTS signal playback mode)

Decoding and playback are only performed when DTS signals are being input.

rANALOG (exclusive analog audio signal playback mode) The signals input to the analog input jacks are decoded and played.

(This cannot be selected in the DVD mode.)

NOTE:

•The input mode is automatically set to “AUTO” when the input is switched to DVD.

3	Either press the SURROUND MODE button on the main unit
3	then turn the FUNCTION/SELECT dial or press the
	SURROUND button on the remote control unit to select the
	play mode.