Connecting Other Sources

2AM loop antenna assembly

ENGLISH

Connecting Other Sources

Connecting the MULTI ZONE terminals

12

Remove the vinyl tie and take out the connection line.

4

a. Antenna placed on a stable surface.

Mount

b. Hanging the antenna on a wall.

Connect to the AM antenna terminals.

3

Bend in the reverse direction.

Connection of AM antennas

1. Push the lever.

2. Insert the conductor.

3. Return the lever.

For instructions on operations using the MULTI ZONE functions ( page 35, 36).

Connecting a room-to-room remote control unit

When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

RC-617 INFRARED SENSOR

 

 

 

 

 

 

 

+

 

 

 

 

OUTPUT

+

 

 

 

 

INPUT

AUX OUT

Use the

installation hole to secure the antenna to a wall, etc.

RC-616 INFRARED RETRANSMITTER

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.

Extension terminals for future use.

NOTE:

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

14

ENGLISH