Advanced Setup

Setting the Digital In Assignment

This setting assigns the digital input terminals of the AVR-1706 for the different input sources.

1 Press the CURSOR F or G button to assign the input function connected to the COAXIAL 1 input terminal, then press the ENTER or CURSOR

Hbutton to switch the COAXIAL 2 input setting.

*COAX1 CD

CDAUXDVDTVVCRCDROFF

2 Press the CURSOR F or G button to assign the input function connected to the COAXIAL 2 input terminal, then press the ENTER or CURSOR

Hbutton to switch the OPTICAL 1 input setting.

*COAX2 AUX

CDAUXDVDTVVCRCDROFF

3 Press the CURSOR F or G button to assign the input function connected to the OPTICAL 1 input terminal, then press the ENTER or CURSOR

Hbutton to switch the OPTICAL 2 input setting.

*OPT1 DVD

CDAUXDVDTVVCRCDROFF

4 Press the CURSOR F or G button to assign the input function connected to the OPTICAL 2 input terminal, then press the ENTER or CURSOR

Hbutton to switch the Video Input Mode setting.

*OPT2 TV

CDAUXDVDTVVCRCDROFF

•Select “OFF” if nothing is connected.

•“TUNER” and “V. AUX” cannot be selected.

Setting the Video Input Mode

Select the input signal to be output to the composite S-Video and component monitor output terminals using the video conversion function.

1 Press the CURSOR F or G button to select the video input mode, then press the ENTER or CURSOR H button to switch the input source (TV) setting.

*DVD Auto

AutoCompSvideovideo

2 Press the CURSOR F or G button to select the video input mode, then press the ENTER or CURSOR H button to switch the input source (VCR) setting.

*TV Auto

AutoCompSvideovideo

3 Press the CURSOR F or G button to select the video input mode, then press the ENTER or CURSOR H button to switch the Audio Delay setting.

*VCR Auto

AutoCompSvideovideo

ENGLISH

Advanced Setup

Auto:

When there are multiple input signals, the input signals are detected and the input signal to be output from the video monitor output terminal is selected automatically in the following order: component video, S-Video, composite video.

Component:

The signal connected to the component video terminal is always played.

Video conversion is not conducted, so no image is output from the monitor output terminal when there is no input signal to the component terminal.

S-Video:

The signal connected to the S-Video terminal is always played. The S-Video input signal is converted and output from the composite and component monitor output terminal.

Video:

The signal connected to the composite video terminal is always played.

The composite video input signal is up-converted and output from the S-Video and component monitor output terminals.

•Down-converting from the component video signal to the S- Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal

( page 11).

42

ENGLISH