Advanced Setup
Use System Setup to customize a variety of settings to suit your listening environment.
For the contents of a system menu and the initial setting of this unit ( page 44).
Front display
•You can change the settings using the buttons on the remote control unit.
•The
ENGLISH
Advanced Setup
System Setup
Setting the Speaker Configuration
The composition of the signals output to each channel and the frequency response are adjusted automatically according to the combination of speakers actually being used.
1 Press the CURSOR F or G button to select your front speaker type, then press the ENTER or CURSOR Hbutton to switch to the center speaker setting.
MODE 1
ENTER
SETUP
CURSOR
No.
[ Display ]
*COAX1 CD
Currently selected line |
| Current setting |
Press the CURSOR F button to execute.
*TEST TONE Yes<
Currently selected line
1 Set the MODE 1 switch to “AUDIO”.
2 Press the SETUP button to enter the setting.
*System Setup
3 Press the ENTER or CURSOR H button to select the setting, then press the CURSOR F or G button to select the parameter.
*Front Large
LargeSmall
4 Press the ENTER or CURSOR Hbutton to confirm the new settings.
*Center Small
LargeSmallNone
5 Press the SETUP button to finish system set up.
*Front Large
LargeSmall
2 Press the CURSOR F or G button to select your center speaker type, then press the ENTER or CURSOR H button to switch to the surround speaker setting.
*Center Small
LargeSmallNone
When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.
3 Press the CURSOR F or G button to select your surround speaker type, then press the ENTER or CURSOR H button to switch to the surround back speaker setting.
*Surr. Small
LargeSmallNone
When “Small” has been selected for the front speakers, “Large” cannot be selected for the surround speakers.
38
ENGLISH