Basic Operation

INPUT MODE

INPUT SELECTOR STANDARD/NIGHT

Night mode

When listening at night or at lower volumes, the night mode improves listenability.

Press and hold the NIGHT button for several seconds to enter the night mode.

•Canceling night mode:

Press and hold the NIGHT button again.

•The night mode only works when playing program sources recorded in Dolby Digital or DTS.

STANDARD

INPUT

SELECTOR

ENTER

CURSOR

INPUT MODE

Adjusting the audio delay

•When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.

•The audio delay setting is stored separately for each input source.

• This

adjustment can be performed with the system setup

(

page 43) or from the remote control unit, as described

below.

1 Select the input source.

Example: DVD

(Main unit)

(Remote control unit)

2 Press the INPUT MODE button to set the input mode to “AUTO”.

3 Select Dolby/DTS Surround.

(Main unit)

(Remote control unit)

ENGLISH

Basic Operation

4 Play a program source (DVD, etc.).

5 Press the CURSOR D button to switch to the audio delay adjustment display.

6 Press the CURSOR F or G button to set the delay time (0 ms ~ 200 ms).

With a movie source, for example, adjust so that the movement of the actors’ lips is synchronized with the sound.

7 Press the ENTER button to complete the setting.

•The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct or stereo mode.

24

ENGLISH