ENGLISH

Advanced Setup

Setting the Audio Delay

•When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.

•The audio delay setting is stored separately for each input source.

Press the CURSOR F or G button to set the delay time, then press the ENTER or CURSOR H button to switch the Auto Surround Mode setting.

With a movie source, for example, adjust so that the movement of the actors’ lips is synchronized with the sound.

*A.Delay 0ms

0ms100ms200ms

•The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode.

•By default, this menu is not displayed when no digital signals are being input.

Setting the Auto Surround Mode

The surround mode used last for the three types of input signals shown below is stored in the memory, and the signal is automatically played with that surround mode the next time it is input.

Note that the surround mode setting is also stored separately for the different input sources.

qAnalog and PCM 2-channel signals (STEREO)

w2-channel signals in the Dolby Digital, DTS or another multi- channel format (DOLBY PLIIx Cinema)

eMulti-channel signals in the Dolby Digital, DTS or another multi- channel format (DOLBY/DTS SURROUND)

Default settings are indicated in ( ).

Press the CURSOR F or G button to select the Auto

Surround mode, then press the ENTER or CURSOR

Hbutton to switch the Ext. In Subwoofer Level setting.

*Auto Surr. ON

ONOFF

Advanced Setup

Setting the Ext. In Subwoofer Level

Set the method of playback of the analog input signal connected to the EXT. IN terminal.

Press the CURSOR F or G button to select the ext. in subwoofer channel level playback, then press the ENTER or CURSOR H button to switch the Power

Amp Assignment setting.

*Ext.In SW+15dB

+0dB+5dB+10dB+15dB

Setting the Power Amp Assignment

Make this setting to switch the power amplifier for the surround back channel to ZONE2.

Power Amp

SPEAKER OUT

Assign.

MAIN ZONE

ZONE2

 

 

 

Surround back

7.1ch system

–

 

 

 

ZONE2

5.1ch system

2ch system

Press the CURSOR F or G button to select “S. Back” or “ZONE2”, then press the ENTER or CURSOR H button if you want to start the settings over from the beginning.

*P.Amp S.Back

S.BackZONE2

43

ENGLISH