Denon DN-X1600 Effecter Operations, Setting the BPM, Setting the beat, Selecting the effects












Effecter Operations

Selecting the effector units and channels

With the input channels:

Using the EFX SEND button, select the effect units to be used. The same effect can be selected for a multiple number of channels.

With the mic input and master output:

Using the EFX INS button, select the effect unit to be used. The insertion operation is initiated and just the one channel is selected.

Setting the BPM

1When the auto BPM counter is off, press the TAP button for over 1 second to turn the auto BPM counter on.

2 When the auto BPM counter is on, press the TAP button and release it immediately. The data measured with the auto BPM function is locked.

•The channel for which the effect unit was last selected using the EFX SEND or EFX INS button takes effect as the channel used for the auto BPM counter measurement.

3If the TAP button is pressed down for over 2 seconds, the BPM value can be set directly by pressing the

BEAT buttons.

4The BPM value can be set by the interval during which the TAP buttons are repeatedly pressed.

ENGLISH

			Getting Started
	 		Connections
			Basic
	 
			Operations
	&'9
	4&-&$5
Setting the beat	&'9		EffectorFunction
	0/0''
Press the BEAT ,	buttons to set the number		Fader
1 of beats.			Start
When the TIME button is pressed, the mode is
			USB
2 changed to the time input mode.
The time can be adjusted by pressing the BEAT		,
buttons.			Utility
When the TIME button is pressed again, the number
			Specifications
3 of beats setting mode is restored.
Selecting the effects			Troubleshooting
Turning the effects ON and OFF
Turn the EFX SELECT controls to select the effect, and press the control
to enter the desired effect.
When the Effect ON/OFF buttons are pressed, the effect is turned ON
or OFF.

13