Denon DN-X1600 owner manual Setting the USB audio output, Setting the USB audio input







Setting the USB audio output

The following audio sources can be selected for USB audio output.

•Input channels 1–4 (Pre EQ)

•Mic input (Post Send VR)

•Master output

•REC output

The USB audio output level can be adjusted using a Utility setting.

1Press the UTILITY/–USB A/USB B button.

•The Utility setting screen is displayed.

2Using the EFX SELECT control, select Audio Setting USB Audio Setting Output Source Select.

3 One of the audio sources assigned to the USB output channels is selected on the selection screen displayed.

4Press the UTILITY/–USB A/USB B button.

•The Utility setting screen is closed.

		ENGLISH
Setting the USB audio input			Getting
One of the two modes below is set using the UTILITY			Started
The LED on the side corresponding to the mode
for the USB audio input assignment destinations.
selected lights.
			Connections
The USB audio input levels can be adjusted using
Utility settings. The adjustment values are stored on a
mode by mode basis.
q CH INPUT mode
			Basic
Select this mode when mixing sound using only the DN-X1600
without using the mixer functions of the DJ software.			Operations
The USB audio input signals are assigned using the configuration
shown below.
USB channel 1 and 2 inputs	Input channel 1
USB channel 3 and 4 inputs	Input channel 2		Effector
USB channel 7 and 8 inputs	Input channel 4
USB channel 5 and 6 inputs	Input channel 3		Function
w MASTER mode
Select this mode when using both the mixer functions of the DJ
software and the DN-X1600’s functions.
			Fader
below.
The USB audio input signals are assigned to the buses shown
USB channel 1 and 2 inputs	Master bus		Start
USB channel 3 and 4 inputs	Cue monitor bus
USB channel 5 and 6 inputs	Disabled		USB
USB channel 7 and 8 inputs	Disabled
The mixer output of the DJ software is mixed in the buses using
			Utility
the DN-X1600.
• Ensure that the audio output settings of the DJ software correspond
to the specifications given above.			Specifications
			Troubleshooting

17