DVS function
The DVS (Digital Vinyl System) function is used when a record or CD that contains a time code is played back, and the time code signal input from the CD player is sent to the computer to be converted to a music signal before being input to the unit.
•Check that the DVS software has been installed on the computer.
ENGLISH
Select USB Audio Setting | Preset Input Select in | Getting |
1 the UTILITY settings, and check that the settings | ||
are DVS. |
| Started |
• DVS is the default setting |
| |
Select USB Audio Setting | USB Assign in the |
|
2 UTILITY settings, and change the setting details to | Connections | |
|
| |
CD Player
Record | Record |
Player | Player |
USB OUT 1/2 
3/4 
5/6 
7/8 
USB IN 1/2 
3/4 
5/6 
7/8 
CD Player
USB Cable
Computer
TIME
CODE
Data
AUDIO Data
| CH. |
| |
| Set the channel to be used with the | Basic | |
3 source selector. | |||
Operations | |||
4 Set the USB mode to device mode for the unit. | |||
5 Set the DVS software in the computer. | Effector | ||
6 | Plays the player that is connected to LINE. | Function | |
• Enter the TIME CODE data to the connected LINE. The | |||
| TIME CODE data is entered to the computer via the | ||
|
| ||
| USB cable. The data is converted to AUDIO data by the | Fader | |
| computer, and then input to the various channels of this | ||
| device. | ||
| Start | ||
7 Adjust the volume etc. for the connected line. | |||
USB | |||
CH1 Input | CH2 Input | CH3 Input | CH4 Input |
|
|
|
|
|
|
Utility |
|
Specifications |
|
Troubleshooting |
|
19
