Denon DN-X1600 owner manual Preset Export, Preset Import, Preset Recall, Owner Setting Mode

ENGLISH

Getting	Preset Export
	Writes the details of the settings performed in utility mode to the
Started
	connected USB memory.
	1 Connect the USB memory to the unit.

When OK is selected, the presets are restored to the	Preset Import
5 status before they were called.
	This imports the setting contents from the export file that was
• After the presets are called, they are retained while the
unit remains connected to the computer even if the USB B	written to the USB memory.
	After recall is completed, the setting details are updated in the unit.
mode is selected.

Connections	In the Utility settings, select Other Settings
	2 Preset Export.
Basic
	Press Execute to write the Preset conditions to the
Operations	3 USB memory.
	• If an export file already exists, an overwrite confirmation
	screen is displayed.
	• If you perform Preset Import on a DN-X1700 using a file
Effector
	exported from a DN-X1600 using Preset Export, the
	settings in the imported file may be different from those
Function	in the exported file. In this case, set the items that are
	different.
Fader	Preset Recall
Start	This recalls the setting contents from the export file that was
	written to the USB memory.
USB	After recall is completed, the setting details are not updated in the
	unit.
	Use Preset Recall to temporarily use the settings stored in the USB
Utility
	memory.
	Insert the USB memory device with the export files
Specifi	1 into the DN-X1600 or turn on the unit's power with
	the device already inserted.
cations
	A screen prompting the user to verify whether the
	2 presets are to be called appears.
Troubleshooting
	When OK is selected, the preset Audio Setting and
	3 MIDI Setting of the export file are called.
	• The preset information stored inside the DN-X1600 is not
	updated.
	When the USB memory device is ejected, a screen
	4 prompting the user to verify whether to return to
	the status before the presets were called appears.
	• Cancel cannot be selected.

Owner Setting Mode

When the POWER switch is set to the ON position while the UTILITY/–USB A/USB B button is held down, the Owner Setting mode is established, and the settings listed below can be selected.

To release the Owner Setting mode, set the POWER switch to the OFF position.

	Parameter	Value	Default
1. Digital Output FS		INT / 44.1kHz / 48kHz / 96kHz	44.1kHz
2. Power ON USB Mode		USB A / USB B	USB A
3.	Preset Import	Exit / Execute*1	-
4.	DN-X1600 Initialize	Exit / Execute*2	-

•Using the Preset stored externally, the internal memory is updated, and the settings are reflected in the device.

•All the Owner settings and Preset are set to the factory settings.

1.Digital Output FS

This sets the digital output frequency for the unit. When set to INT, the frequency is synchronized with the System Setting sampling frequency.

2.Power ON USB Mode

This selects the USB mode to be used when the power is switched on.

3.Preset Import

Imports the presets from inside the USB memory.

4.DN-X1600 Initialize

Returns all of the items for the unit to the factory settings.

1In the Owner Setting mode, insert the USB memory device with the export files into the DN-X1600 or establish the Owner Setting mode with the device already inserted.

2A screen prompting the user to verify whether the preset memory is to be updated appears.

3When OK is selected, the contents of the preset memory are updated to the contents of the export files.

NOTE

•Bear in mind that the data prior to the updating will not be retained.

24