Denon DN-X1600 owner manual Crossfader Start, Fader setting the fader curve

Crossfader Start

1Using the SOURCE SEL controls, select the source from LINE1 CD, LINE2 CD, LINE3 CD and LINE4 CD.

2 Set the CROSSFADER ASSIGN switches (A/ THRU/B) to A or B.

3Turn on the CROSSFADER START switches.

4 Slide the Crossfader all the way in direction opposite the source you want to start.

(In the following example, startup is done with the CD player connected set to Assign A.)

5Set the standby mode on CD player.

6Use the CROSSFADER CONTOUR control to control the cross fader startup curve.

7 When the Crossfader is slide in the opposite direction, CD player play will begin.





FADER (setting the fader curve)

This adjusts the rise response of the channel fader/cross fader.

1Setting the channel fader curve

•When the channel fader CONTOUR control is turned to the left, the curve will have characteristics that rise gradually.

•When turned to the right, it will have characteristics that rise sharply.

•At the center position, curve characteristics between the two will be produced.

•The same curve characteristics apply to channels 1 to 4.

2Setting the crossfader curve

•When the crossfader CONTOUR control is turned to the left, the curve will have characteristics that rise gradually.

•When turned to the right, it will have characteristics that rise sharply, and cut-in and cut-out operations will be performed.

•At the center position, curve characteristics between the two will be produced.

ENGLISH

How to adjust the Crossfader torque			Getting
1 Remove the rubber cap of the front panel.			Started
	Move the Crossfader to the far right until the screw		Connections
2 head becomes visible.
3	Insert a screwdriver, and adjust the sliding torque.		Basic Operations
			Effector
	The sliding torque is increased so that	the Crossfader
	• When the screw is turned clockwise:
	moves more stiffly.		Function
	• When the screw is turned counterclockwise:
	The sliding torque is decreased so that the Crossfader
	moves more easily.		FaderStart
4 rubber cap onto the front panel.		replace the
	After completing the adjustments,
NOTE			USB
• The Crossfader has a high-precision construction: As such, tightening			Utility
the screw with too much force or loosening it excessively may result
in damage or adversely affect performance.
			Specifi
	Rubber cap		cations
	Screwdriver		Troubleshooting

15