English
–13 –EN

Connection to an audio system

Stereo system
Optical cable (not supplied)
•Optical cable (not supplied) may be damaged when bent at sharp angles.Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
•Use a cable which is 3m or shorter.
•Insert cable plugs firmly into the connectors when making connections.
•If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
NOTES
•If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup
mode.(See page 25)
•If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.(See page 25)
•
Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio output in the setup
mode.Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 25)
•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or
DAT deck.
•
Set Dolby Digital and DTS to OFF for audio output in the setup mode for method 1 only.Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers.(Refer to page 25 to set ON for Dolby Digital and DTS)
AUDIO
DVD
Audio Input Jacks Digital Audio Input
Jacks
Analog Audio Out Digital Audio Out
• Method 1 DVD Player + Stereo system
• Method 2 DVDPlayer + Dolby Digital decoder or DTS decoder
Dolby Digital decoder
or
DTS decoder

Method 1 Method 2

HOOK UPS
The following show examples of connections commonly used to connect the DVD player either TV and other
components.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
E8620UD_EN.QX33 03.6.4 6:50 PM Page 13