English
–15 –EN
During playback, press the
STILL/PAUSE button.
•Playback will pause and sound
will be muted.
The disc advances by one frame each time the
STILL/PAUSE buttonis pressed.
To exit step by step playback, press the PLAY but-
ton.
3
2
1
DVD-V
Step by Step Playback
During playback, press the
STILL/PAUSE button.
•Playback will pause and sound
will be muted.
To continue playback, press the PLAY button.
2
1
WMAMP3CDDVD-V
Pause Getting started
•Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
•Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
Press the POWER ON button.
•“P-ON”will appear briefly on the display panel.
Press the OPEN/CLOSE button to open disc load-
ing tray.
Press the DISK SKIP button repeatedly or press
the DISK NUMBER button.
•The desired disk tray moves to the front position.
Place the disc in the tray,
with the label facing up.
•Repeat steps 3 and 4 to
load more discs.
Press the PLAY button.
•The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press the PLAY
button.
•If the disc has not been set on the tray, the DVD player
will play the disc which is set on the right side tray.
•When you want to select the other disc, press the DISC
SKIP button repeatedly or the DISC NUMBER button
for your desired disc.
•When you playback the DVD with a title menu is
recorded, it may appear on the screen.In this case,
refer to “TITLE MENU”.
Press the STOP button to stop playback.
NOTES:
•A “prohibited icon”may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player or
the disc.
•With DVDs that use some titles
for playback program signals, playback may start from
the second title, or it may skip these titles.
•During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
•During the playback of a DVD-RW which has been
recorded in the VR mode, the sound or picture may
freeze momentarily depended on disc content.
•You can open the tray and change 2 discs during play-
back by pressing the DISC EXCHANGE button.
•Disc position will be displayed on the TV screen for
about 5 minutes when you turn on the power or close
the tray.
6
5
4
3
2
1
CDDVD-V
Left side tray
Right side tray
Press the MENU button.
•The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the cursor buttons ( L / K / B / s) to select
an item, and the ENTER button to confirm selec-
tion.
4
3
2
1
DVD-V
PLAYING A DISC
Basic PlaybackDisc Menus
DVD may contain menus to navigate the disc and access
special features.Press the appropriate numerical key or use
the cursor buttons ( L / K/ B / s) to highlight your selec-
tion in the DVD main menu and press the ENTERbutton to
confirm.
NOTE:
•Unless stated, all operations described are based on
remote control use.Some operations can be carried
out using the menu bar on the TV screen.
General Features
Press the TOP MENU button.
•The title menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
Press the cursor buttons ( L / K / B / s) to select
an item, and the ENTER button to confirm selec-
tion.
•Playback will begin at the selected Title.
3
2
1
DVD-V
Title Menu
•Press the MENU button to call up the DVD main menu.
•Press the TOP MENU button to call up the title menu.
NOTE:
•Contents of menus and corresponding menu opera-
tions may vary between discs.Refer to the manual
accompanying the disc for details.
DVD-V
CALLING UP A MENU SCREEN DURING PLAYBACK
F
F
The brightness of the front display can be adjusted from the
SETUP menu.Details are on page 24.
Brightness of the Front Display
E8620UD_EN.QX33 03.6.4 6:50 PM Page 15