4
OPTIONAL REMOTE CONTROL ACCESSORIES LOCAL CODES
PRODUCT FEATURES UNPACKING
OPTIONAL REMOTE CONTROL ACCESSORIES
(For Remote-Ready Models Only)
There are four optional remote controls that can be purchased separately for
• | wall switch | • | |
• | wall thermostat | • |
See Accessories, pages 38 and 39.
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT FEATURES
SAFETY PILOT
This fireplace has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
PIEZO IGNITION SYSTEM
This fireplace has a piezo ignitor. This system requires no matches, batteries, or other sources to light fireplace.
THERMOSTATIC HEAT CONTROL FOR
UNPACKING
1.Remove log box and fireplace from carton. IMPORTANT: The fireplace hood is inside the cardboard protective end wrap on the left side of fireplace (as viewed from front). A decal is on the outside of the cardboard end wrap stating hood is enclosed (see Figure 2).
2.Remove hood from cardboard protective end wrap as shown in Figure 2.
3.Remove all protective packaging applied to fireplace for shipment.
4.Make sure your fireplace includes one hardware packet.
5.Check fireplace for any shipping damage. If fireplace is dam- aged, promptly inform dealer where you bought fireplace.
Hood | IMPORTANT: |
THIS PACKAGE CONTAINS A | |
Enclosed | FIREPLACE HOOD. UNWRAP |
Decal | CARTON AND REMOVE HOOD |
BEFORE DISCARDING | |
| PROTECTIVE PACKAGING. |
| Cardboard |
| Protective |
| Fireplace End |
| Wrap |
| 2 |
| 1 |
| Hood |
Figure 2 - Removing Fireplace Hood
For
.
.com
