Desa GVR50BPA, GVR65PA Installing Heater, Continued, Installing Radiants, Location of Radiants

14

INSTALLING HEATER

Continued

INSTALLING RADIANTS

WARNING

WARNING ICON G 001

Carefully handle the glass panel. Glass edges are rounded and buffed to prevent cuts, however, chipped or broken sections of glass can present sharp edges. These sharp edges can cut skin.

1.Remove glass guard from across opening at front of heater (see Figure 9).

2.Place radiants into combustion chamber through opening at front of heater. Front of radiant sits on front radiant support (see Figure 10). Back of radiant rests on back radiant support (see Figures 9 and 10).

Note: Radiants should never come in contact with burner flame. Contact with flame may cause carbon or soot deposits on radiants.

Burner

Glass

Guard

	Combustion
	Chamber
	Back Radiant
	Support
Lower	Lower Front
	Access Area
Front Access
Panel	Glass Retaining
	Channel
	Figure 9 - Location of Radiants
	Back Radiant Support
	Radiant

Burner

Front Radiant Support

Figure 10 - Position of Radiant

100791