Desa MSBVBP Removing/Replacing Glass Door, Installing Remote Receiver, Sun Valley Stove Company

SUN VALLEY STOVE COMPANY

B-VENT FREESTANDING FIREPLACE

FIREPLACE INSTALLATION

Continued

INSTALLING OPTIONAL WIRELESS HAND-HELD REMOTE CONTROL ACCESSORIES - GHRC AND GHRCT SERIES

Installing Remote Receiver

1.Open bottom door on stove body and locate the switch plate on the left of the valve bracket.

2.Unscrew switch plate (see Figure 37).

3.Disconnect wires from THTP and TH on control valve that lead to the switch (see Figure 34, page 15). Discard switch plate, screws, and nuts.

4.Install battery into receiver battery clip and connect to terminals (see Figure 38).

5.Place receiver into valve bracket and align holes (see Figure 39).

6.Use push-in fasteners included with receiver to secure to bracket.

7.Connect the wires from the receiver to the valve at TH and THTP (see Figure 34, page 15).

LO

H

I

OFF	I
	P
	L
ON	O
	T

Figure 39 - Installing Remote Receiver

Installing 9-Volt Battery in Hand- Held Remote Control Unit

1.Remove battery cover on back of re- mote control unit

2.Attach terminal wires to a 9-volt bat- tery (not included). Place battery into the battery housing.

3.Replace battery cover onto remote con- trol unit.

	Battery	Remote
		Control Unit
Terminal	Cover
Wires
9-Volt
Battery

2.Remove the screws from the 2 tabs at the top of the glass door while holding door securely keeping it from falling forward (see Figure 42).

3.Grasp door by both sides and ease it upward off of the lower bracket (see Figure 42).

4.To replace glass door, follow the above instructions in reverse.

Bolt

Bolt

Stove Front Panel

Figure 41 - Removing Front Panel from Stove

LO

H

I

OFF	I
	P
	L
ON	O
	T

Figure 37 - Removing Switch Plate

Receiver

Terminal

Wires

Battery

Clip

9-Volt Battery

Figure 38 - Installing Battery in Receiver

Battery Housing

Figure 40 - Installing Battery in Hand- Held Remote Control Unit

REMOVING/REPLACING GLASS DOOR

You must remove glass door to install logs, lava rock, and ember material. To remove glass door, you must first remove the front panel on stove body.

CAUTION: Do not operate this fireplace with a broken glass door panel or without the glass door panel securely in place. For re- placement part information see Replacement Parts, page 25.

1.Remove 2 bolts from bottom of stove and one from the top of stove to remove front panel (see Figure 41).

Screw

Glass

Door

Figure 42 - Removing Glass Door from Firebox Insert

16 106022