OWNER’S MANUAL
PRE-INSTALLATION PREPARATION
Continued
4" | 4" |
Figure 4 - Clearance for Corner Installation
26"
Front
FREESTANDING FIREPLACE ASSEMBLY
STOVE BODY ASSEMBLY
1.Lift off corrugated box enclosing stove body crating.
2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from
3.Remove plastic bag from stove body.
4.Remove back panel from stove and dis- card (see Figure 6). Use an adjustable wrench or a 10 mm socket. Remove six
(6) bolts and washers. Keep bolts and washers to attach brackets when install- ing fireplace insert into stove body. Dispose of back panel.
5.Remove all contents from inside stove cavity. Contents include:
7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.
8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 9 and Figure 10, page 6). Use an adjustable wrench or a 12mm socket.
9.Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figure 9 and Figure 11, page 6). Use an adjustable wrench or a 10mm socket.
Bolt | Front | Pallet Wood | ||
|
|
|
|
|
|
|
|
|
|
25"
Figure 5 - Freestanding Fireplace Bottom Dimensions
(1) - Stove bottom
(4)- Legs with leg leveler bolts
(1)- Bottom door
(1)- Top grate
(1)- Hardware kit bag with fasteners
6.Carefully lay stove body on back to at- tach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.
Bolt | Product |
| |
Back | Identification |
Label | |
Stove |
|
Panel |
|
Figure 6 - Removing Back Panel
Top of Stove Unit
Front of |
| |
Stove |
| |
Unit | Pallet | |
Drop | ||
Wood | ||
Cloth/ | Bolted to | |
Blanket | Bottom of | |
| Stove | |
| Body |
Pallet Wood | Bottom Of | ||
|
| Stove Unit | |
Figure 8 - Removing Pallet Wood From | |||
The Bottom of The Stove |
| ||
Door Hinge | Door Catch Bolt With | ||
Step Bolt Hole | Adjustable Hex Nuts Hole | ||
Leg | Front | Leg | |
Hole | Hole | ||
| |||
Stove 
Bottom
Hole
Leg Hole
Bottom Of Stove Unit
Figure 9 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment
Front of Stove Unit
Stove
Unit
Figure 7 - Laying Down Stove On Side | Continued |
106022 | 5 |
