Desa UNVENTED (VENT-FREE) NATURAL GAS FIREPLACE Local Codes Unpacking Product Features, Operation

LOCAL CODES

UNPACKING

PRODUCT

FEATURES

Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

1.Remove trim kit and cartons containing logs from carton. Place the carton containing the fireplace unit on its back. Hold fireplace unit and pull the carton and pallet away.

2.Remove protective packaging applied to logs, log base assembly, and fireplace. You may not want to remove protective plastic on front of fireplace until after installing. This will protect fireplace from dust, debris, and damage during installation.

3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought fireplace.

Operation

This vent-free fireplace is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by both realistic flames and glowing embers.

Safety Device

This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/pilot is a required feature for vent-free room heaters. The ODS system shuts off the fireplace if there is not enough fresh air.

Piezo Ignition System

This fireplace has a piezo ignitor. This system requires no matches, batteries, or other sources to light fireplace.

Manual Control

This fireplace has a control valve. The valve controls the heat output and flame height. This maintains a consistent room temperature. Even the lowest setting provides realistic flames and glowing embers from two burners. Selecting higher comfort settings produces greater heat output. This results in increased heating comfort. This can also result in lower gas bills.

101742

5