POWER CONNECTIONS

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a time delay fuse. NOTE: Time delay fuses should be marked “D” in Canada and “T” in the US. If an extension cord is used, use only 3-wire extension cords which have 3-prong grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the machine to the power line, make sure the switch (s) is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the machine.

Do not expose the machine to rain or operate the machine in damp locations.

MOTOR SPECIFICATIONS

Your machine is wired for 240, or 200/230/460 volt, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the “OFF” position.

GROUNDING INSTRUCTIONS

This machine must be grounded while in use to protect the operator from electric shock.

1.All grounded, cord-connected machines:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instruction are not completely understood, or if in doubt as to whether the machine is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the machine’s plug, as shown in Fig. A.

Repair or replace damaged or worn cord immediately.

2.Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than

150 volts:

If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig. B may be used to connect this plug to a matching 2-conductor receptacle as shown in Fig. B, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. Whenever the adapter is used, it must be held in place with a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.

In all cases, make certain that the receptacle in question is properly grounded. If you are not sure, have a qualified electrician check the receptacle.

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDED OUTLET BOX

GROUNDING MEANS

ADAPTER

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

Fig. A

Fig. B

5

Page 5
Image 5
DeWalt 31-735 instruction manual Power Connections, Motor Specifications, Grounding Instructions

31-735 specifications

The DeWalt 31-735 is a powerful and versatile tool designed to meet the needs of both professionals and DIY enthusiasts alike. This sturdy machine has gained popularity for its exceptional performance and reliability, making it a top choice for various applications, including woodworking, metalworking, and general construction tasks.

One of the key features of the DeWalt 31-735 is its robust motor, which provides a substantial amount of power for heavy-duty applications. With a high RPM rating, this tool can efficiently tackle demanding tasks, allowing users to work through projects with increased speed and efficiency. The ergonomic design also contributes to its user-friendly nature, providing comfort during extended use, which helps to reduce fatigue.

The DeWalt 31-735 is equipped with advanced technologies that enhance its functionality. One notable feature is its precision cutting mechanism, which ensures accurate and clean cuts every time. The adjustable speed settings allow users to customize the tool's performance based on the material being worked on, providing greater versatility and control.

Another significant characteristic of the DeWalt 31-735 is its durability. Constructed with high-quality materials, this tool is built to withstand the rigors of demanding job sites. Its dust-collection system is designed to minimize debris and maintain a cleaner workspace, enhancing both the user's experience and the longevity of the tool.

The DeWalt 31-735 also boasts compatibility with various attachments and accessories, making it a highly adaptable option for a range of applications. Users can easily switch between different attachments, enabling quick transitions from one task to another without the need for extensive downtime.

Safety is a priority with the DeWalt 31-735, as it is equipped with features like overload protection and safety guards, ensuring that users can operate the machine confidently and securely. Additionally, the tool's solid base provides stability during operation, contributing to increased precision and safety.

In summary, the DeWalt 31-735 stands out as a reliable and efficient tool designed for those who value power, precision, and durability. With its innovative features and user-friendly design, it is undoubtedly an excellent addition to any tool collection, promising to deliver outstanding performance across a wide range of tasks. Whether for professional use or personal projects, the DeWalt 31-735 demonstrates exceptional versatility and reliability.