Type11flaringcupwheelbackingflange N197992

Type1flangesetD284932

7"Type1guardD284931

Grindingbackingflange54339-00

Clampnut22191-00

Wheelwrench61820-01

Softmountspindleprotector445928-01

i_WARNING: Accessories must be rated for at least the speed recommended on the tool waming label Wheels and other accessories running over their rated accessory speed may fly apart and cause injury. Threaded accessories must have a 5/8"-11 hub. Every unthreaded accessory must have a 7/8" (22.2 mm) arbor hole. If it does not, it may have been designed for a circular saw. Use only the accessories shown on pages 11-13 of this manual. Accessory ratings must always be above tool speed as shown on tool nameplate.

Mounting Guard

MOUNTING AND REMOVING GUARD (FIG. 6, 7}

_ WARNING: Guards must be used with all grinding wheels,

cutting wheels, sanding flap discs, wire brushes, and wire

wheels. Guard modification that results in reduced coverage of the accessory could result in severe personal injury. The too/ may be used without a guard only when sanding with conventional sanding discs. A Type 27 guard (intended for use with depressed center grinding wheels [Type 2 7 and Type 29], sanding flap discs, wire wheels and wire cup brushes) is available at extra cost from your local dealer or authorized service cente_ Grinding and cutting with wheels other than Type 27 and 29 require different accessory guards not included with tool A Type 1 guard is provided for use with the Type 1 wheel. Mounting instructions for accessory guards are shown below and are also included in the accessory package.

11

Sanding

Flap Discs

soft mount

soft mount

445928-01

445928-01

Type 27 guard

Type 27 guard

D284937

7"

D284937

7"

D284939

9"

D284939

9"

 

 

backingflange

hubbed sanding

54339-00

 

 

flap disc

 

 

 

 

 

non-hubbed

sanding

 

 

flap disc

clamp nut 22191-00

NOTE: Wheel size must match guard size; i.e., a new 7" wheel may not be used with a 9" guard. The bottom surface of wheel must be inside the bend of the guard lip.

Page 11 Page 13
Page 12
Image 12
DeWalt DWE4559CN instruction manual Mounting Guard, Sanding Flap Discs, Mounting and Removing Guard
Page 11 Page 13

DWE4559CN specifications

The DeWalt DWE4559CN is a powerful and robust angle grinder designed for heavy-duty applications in various professional environments. Known for its reliability and performance, this tool is a favorite among contractors, metal workers, and DIY enthusiasts alike.

At the core of the DWE4559CN is a high-performance 4.0 HP motor that delivers impressive 6,000 RPM, providing the power needed to tackle even the most demanding grinding tasks. This grinder is equipped with a 9-inch wheel, making it ideal for cutting, grinding, and finishing a wide range of materials including metal, concrete, and masonry. The larger wheel size allows for greater material removal and improved efficiency.

One of the standout features of the DWE4559CN is its advanced overload protection mechanism. This technology prevents the motor from overheating by automatically shutting down the tool in case of excessive load conditions. This not only extends the lifespan of the grinder but also ensures safe operation during intense tasks.

Another noteworthy characteristic is the one-touch guard feature, which simplifies the process of adjusting the guard position without the need for additional tools. This ensures that users can quickly adapt the tool to various applications while maintaining safety. The grinder also includes a cast metal gear case that enhances durability and provides better protection against wear and tear in harsh working environments.

The DWE4559CN is designed with user comfort in mind, featuring an ergonomic handle and a two-position side handle for better control and reduced vibration during prolonged use. This enhances user comfort and reduces fatigue, allowing for extended working periods without compromising performance.

Furthermore, the grinder showcases a spindle lock button, making wheel changes quick and effortless. Its industry-standard 5/8-inch - 11 spindle thread accommodates a wide variety of grinding wheels, ensuring versatility in applications.

In summary, the DeWalt DWE4559CN angle grinder combines power, durability, and user-friendly features, making it an invaluable tool for professionals seeking reliability and efficiency in their grinding tasks. Its robust design and advanced technologies help ensure that users can tackle challenging projects with confidence and ease. Whether for industrial use or intensive DIY projects, the DWE4559CN stands out as a dependable choice.
Top Page Image Contents