3.Sandingshouldbedoneinamannertoreducetrackingofpaint

dustoutsidetheworkarea.

CLEANING AND DISPOSAL

1.All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project. Vacuum filter bags should be changed frequently.

2.Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris. They should be placed in sealed refuse receptacles and disposed of through regular trash pick-up procedures.

During clean up, children and pregnant women should be kept away from the immediate work area.

3.All toys, washable furniture and utensils used by children should be washed thoroughly before being used again.

Mounting and Using Wire Brushes and Wire Wheels

Wire cup brushes or wire wheels screw directly on the grinder spindle without the use of flanges. Use only wire brushes or wheels provided

with a 5/8"-11 threaded hub. AType 27 guard is required when using wire brushes and wheels.

CAUTION: To reduce the risk of personal injury, wear work gloves when handling wire brushes and wheels. They can become sharp.

A CAUTION: To reduce the risk of damage to the tool, wheel or brush must not touch guard when mounted or while in use. Undetectable damage could occur to the accessory, causing wires to fragment from accessory wheel or cup.

MOUNTING WIRE CUP BRUSHES AND WIRE WHEELS

1. Thread the wheel on the spindle by hand.

18

2.Depress spindle lock button and use a wrench on the hub of the wire wheel or brush to tighten the wheel.

3.To remove the wheel, reverse the above procedure.

NOTICE: To reduce the risk of damage to the tool, properly seat the wheel hub before turning the tool on.

USING WIRE CUP BRUSHES AND WIRE WHEELS (FIG. 16} Wire wheels and brushes can be used for removing rust, scale and paint, and for smoothing irregular surfaces.

NOTE: The same precautions should be taken when wire brushing paint as when sanding paint (refer to Precautions To Take When Sanding Paint).

1.Allow the tool to reach full speed before touching the tool to the work surface.

2.Apply minimum pressure to work surface, allowing the tool to operate at high speed. Material removal rate is greatest when the tool operates at high speed.

3.Maintain a 5° to 10 ° angle between the tool and work surface for wire cup brushes.

4.Maintain contact between the edge of the wheel and the work surface with wire wheels.

5.Continuously move the tool in a forward and FIG.16 back motion to avoid creating gouges in

the work surface. Allowing the tool to rest on the work surface without moving, or moving the tool in a circular motion causes

burning and swirling marks on the work surface.

6.Remove the tool from the work surface before turning the tool off. Allow the tool to stop rotating before setting it down.

_,CAUTION: Use extra care when working over an edge, as a sudden sharp movement of grinder may be experienced.

Page 18 Page 20
Page 19
Image 19
DeWalt DWE4559CN Dustoutsidetheworkarea, Sandingshouldbedoneinamannertoreducetrackingofpaint, Cleaning and Disposal
Page 18 Page 20

DWE4559CN specifications

The DeWalt DWE4559CN is a powerful and robust angle grinder designed for heavy-duty applications in various professional environments. Known for its reliability and performance, this tool is a favorite among contractors, metal workers, and DIY enthusiasts alike.

At the core of the DWE4559CN is a high-performance 4.0 HP motor that delivers impressive 6,000 RPM, providing the power needed to tackle even the most demanding grinding tasks. This grinder is equipped with a 9-inch wheel, making it ideal for cutting, grinding, and finishing a wide range of materials including metal, concrete, and masonry. The larger wheel size allows for greater material removal and improved efficiency.

One of the standout features of the DWE4559CN is its advanced overload protection mechanism. This technology prevents the motor from overheating by automatically shutting down the tool in case of excessive load conditions. This not only extends the lifespan of the grinder but also ensures safe operation during intense tasks.

Another noteworthy characteristic is the one-touch guard feature, which simplifies the process of adjusting the guard position without the need for additional tools. This ensures that users can quickly adapt the tool to various applications while maintaining safety. The grinder also includes a cast metal gear case that enhances durability and provides better protection against wear and tear in harsh working environments.

The DWE4559CN is designed with user comfort in mind, featuring an ergonomic handle and a two-position side handle for better control and reduced vibration during prolonged use. This enhances user comfort and reduces fatigue, allowing for extended working periods without compromising performance.

Furthermore, the grinder showcases a spindle lock button, making wheel changes quick and effortless. Its industry-standard 5/8-inch - 11 spindle thread accommodates a wide variety of grinding wheels, ensuring versatility in applications.

In summary, the DeWalt DWE4559CN angle grinder combines power, durability, and user-friendly features, making it an invaluable tool for professionals seeking reliability and efficiency in their grinding tasks. Its robust design and advanced technologies help ensure that users can tackle challenging projects with confidence and ease. Whether for industrial use or intensive DIY projects, the DWE4559CN stands out as a dependable choice.
Top Page Image Contents