Additional Safety Warnings Specific for

toprotectoperatorfrombrokenwheelfragments,accidental

contactwithwheel,andsparksthatcouldigniteclothing.

c) Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel Abrasive cut-off wheels are intended for peripheral grinding, side fomes applied to these wheels may cause them to shatte_

d)Always use undamaged wheel flanges that are of correct size and shape for your selected wheel Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.

e)Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may burst.

d)Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully reenter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.

e)Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel

f)Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

_brasive Cutting-Off Operations

a)Do not "jam" the cut-offwheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.

b)Do not position your body in line with and behind the rotating wheel When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.

c)When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur, investigate and take corrective action to eliminate the cause of wheel binding.

Safety Warnings Specific for Sanding

Operations

a)Do not use excessively oversized sanding disc paper.

Follow manufacturer's recommendations when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.

Safety Warnings Specific for Polishing Operations

a)Do not allow any loose portion of the polishing bonnet

or its attachment strings to spin freely. Tuck away or

trim any loose attachment strings. Loose and spinning

attachment strings can entangle your fingers or snag on the workpiece.

DWE4559CN specifications

The DeWalt DWE4559CN is a powerful and robust angle grinder designed for heavy-duty applications in various professional environments. Known for its reliability and performance, this tool is a favorite among contractors, metal workers, and DIY enthusiasts alike.

At the core of the DWE4559CN is a high-performance 4.0 HP motor that delivers impressive 6,000 RPM, providing the power needed to tackle even the most demanding grinding tasks. This grinder is equipped with a 9-inch wheel, making it ideal for cutting, grinding, and finishing a wide range of materials including metal, concrete, and masonry. The larger wheel size allows for greater material removal and improved efficiency.

One of the standout features of the DWE4559CN is its advanced overload protection mechanism. This technology prevents the motor from overheating by automatically shutting down the tool in case of excessive load conditions. This not only extends the lifespan of the grinder but also ensures safe operation during intense tasks.

Another noteworthy characteristic is the one-touch guard feature, which simplifies the process of adjusting the guard position without the need for additional tools. This ensures that users can quickly adapt the tool to various applications while maintaining safety. The grinder also includes a cast metal gear case that enhances durability and provides better protection against wear and tear in harsh working environments.

The DWE4559CN is designed with user comfort in mind, featuring an ergonomic handle and a two-position side handle for better control and reduced vibration during prolonged use. This enhances user comfort and reduces fatigue, allowing for extended working periods without compromising performance.

Furthermore, the grinder showcases a spindle lock button, making wheel changes quick and effortless. Its industry-standard 5/8-inch - 11 spindle thread accommodates a wide variety of grinding wheels, ensuring versatility in applications.

In summary, the DeWalt DWE4559CN angle grinder combines power, durability, and user-friendly features, making it an invaluable tool for professionals seeking reliability and efficiency in their grinding tasks. Its robust design and advanced technologies help ensure that users can tackle challenging projects with confidence and ease. Whether for industrial use or intensive DIY projects, the DWE4559CN stands out as a dependable choice.

DeWalt DWE4559CN instruction manual Contactwithwheel,andsparksthatcouldigniteclothing, Operations

Models: DWE4559CN

contactwithwheel,andsparksthatcouldigniteclothing.