G586SP/G586SP AIO
21
Cache Configuration
The system board supports 3.3V pipeline burst or asynchro-
nous cache SRAM installed in the 160-pin cache module
slot. The board can be configured to the following cache
sizes: 256KB, 512KB, or 1MB.
Installing the Cache Module
1. Locate the 160-pin cache module slot on the system
board. Position the cache module above the slot. Make
sure pin 1 of the cache module is aligned with pin 1 of
the slot. Carefully slide the module into the slot. Press
firmly on top of it to seat it properly.
Note:
Do not use 5V SRAM as they will not function properly. You
must first remove the onboard SRAM and/or TAG SRAM and
select the appropriate module type on JP14 before installing
the cache module.