G586SP/G586SP AIO
41

The system board supports four PCI slots. Each slot may be

assigned INT A, B, C, D if the card installed in the slot

requires an interrupt. Each INT may then be assigned an IRQ

value. This is done automatically if the PnP BIOS Auto-

Configoption is enabled.

PCI Configuration Setup

Use the arrow keys to highlight PCI Configuration Setup

and press <Enter>; a screen similar to the one below will

appear.

ESC
F1
F5
F6
F7
: Quit
: Help
: Old Values
: Load BIOS Defaults
: Load Setup Defaults
: Disabled
: 10
: 11
: 9
: 5
: Level
: Enabled
: PCI-Auto
: A
: B
: 4 Ck
: 2 Ck
: Disabled
: Enabled
: Both
: Auto
: Auto
: Auto
: Auto
R
O
M
P
C
I
/
I
S
B
I
O
S
(
2
5
I
D
D
4
9
)
PCI & ONBOARD I/O SETUP
AWARD SOFTWARE, INC.
PnP BIOS Auto-Config.
1st Available IRQ
2nd Available IRQ
3rd Available IRQ
4th Available IRQ
PCI IRQ Activated By
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
CPU-PCI Post Write Rate
Latency for CPU-PCI
CPU-PCI Burst Mem Write
CPU-PCI Post Mem Write
Internal PCI/IDE
IDE Primary Mater PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
Primary IDE Prefetch
Secondary IDE Prefetch
IDE Burst Mode
IDE Post Write
IDE HDD Block Mode
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Onboard Parallel Mode
Serial Port 1 MIDI
Serial Port 2 MIDI
: Both
: Both
: Disabled
: Disabled
: Enabled
: Enabled
: COM1/3F8
: COM2/2F8
: 378H/IRQ7
:Normal
: Disabled
: Disabled