G586SP/G586SP AIO
50
OFFENDING ADDRESS NOT FOUND
This message is used in conjunction with the I/O CHANNEL
CHECK and RAM PARITY ERROR messages when the
segment that has caused the problem cannot be isolated.
KEYBOARD ERROR OR NO KEYBOARD PRESENT
Cannot initialize the keyboard. Make sure the keyboard is
attached correctly and no keys are being pressed during the
boot. If you are purposely configuring the system without a
keyboard, set the error halt condition in Setup to HALT ON
ALL, BUT KEYBOARD. This will cause the BIOS to ignore
the missing keyboard and continue the boot.
MEMORY ADDRESS ERROR AT...
Indicates a memory address error at a specific location. You
can use this location along with the memory map for your
system to find and replace the bad memory chips.
MEMORY PARITY ERROR AT...
Indicates a memory parity error at a specific location. You
can use this location along with the memory map for your
system to find and replace the bad memory chips.
OFFENDING SEGMENT
This message is used in conjunction with the I/O CHANNEL
CHECK and RAM PARITY ERROR messages when the
segment that has caused the problem has been isolated.
PRESS A KEY TO REBOOT
This will be displayed at the bottom screen when an error
occurs that requires a reboot. Press any key and the system
will reboot.
PRESS F1 TO DISABLE NMI, F2 TO REBOOT
When BIOS detects a Non-Maskable Interrupt condition
during boot, this will allow NMI to be disabled and continue
to boot. You can also reboot the system with the NMI
enabled.