DFI G586SP - page 25

G586SP/G586SP AIO

3. Position the CPU above the ZIF socket. Make sure pin 1

of the CPU is aligned with pin 1 of the socket. Lower the

chip until the pins are inserted properly in their

corresponding holes. Remember that very little force is

needed to install the CPU. If the CPU will not insert

easily, verify pin 1 of the CPU is aligned with pin 1 of

the socket. Applying too much pressure can damage the

CPU or the socket.

4. Push the handle down until the handle locks into place.

The top plate will slide forward. You will feel some

resistance as the pressure starts to secure the CPU in the

socket. This is normal and will not damage the CPU.

However, if the handle is not completely closed, damage

to the CPU and/or system board may result.